PCjs Machines

Home of the original IBM PC emulator for browsers.

Logo

DEC PDP-10 KA10 Basic Instruction Diagnostic #9

The PDP-10 KA10 Basic Instruction Diagnostic #9 (MAINDEC-10-DAKAI) test code has been extracted from DAKAIM.MAC [original] and DAKAIT.MAC [original] for use with the PDP-10 Test Machine with Debugger below.

This diagnostic “TESTS THE SHIFTING AND ROTATING INSTRUCTIONS.”

Resources for this diagnostic include:

[PCjs Machine "testka10"]

Waiting for machine "testka10" to load....

The Debugger’s assemble (“a”) command can be used to test the new built-in MACRO-10 Mini-Assembler, which supports a subset of the MACRO-10 assembly language.

This command:

a DAKAI.MAC

will automatically read the DAKAI.MAC source file (a slightly modified copy of DAKAIM.MAC), assemble it, and then load the binary image at the location specified in the file.

Interesting MACRO-10 Bug

Take a look at this piece of original source code:

MOVSI   AC+1,ZZ     ;SET BIT (N) OF AC+1 LEFT
IFG     <ZZ-2,>,<
MOVSI   AC-1,YY     ;SETUP FOR COMPARISON>

and the corresponding lines in the listing file:

11660   037024  205 07 0 00 000001      MOVSI   AC+1,ZZ     ;SET BIT (N) OF AC+1 LEFT
11661                                   IFG     <ZZ-2,>,<
11662   037025  205 05 0 00 000000      MOVSI   AC-1,YY     ;SETUP FOR COMPARISON>

It’s clear from the listing file that ZZ is 1, and therefore the IFG expression ** should be -1, so the *MOVSI AC-1,YY* should be suppressed. And my MACRO-10 Mini-Assembler *does* suppress it. But as you can see from DEC's listing file, they didn't suppress it. This results in an unfortunate mismatch between our respective instruction sequences from that point on.

Why did this happen? Since earlier identical IFG expansions work as expected, I have to assume that the spurious comma in that particular IFG pseudo-op somehow tripped up the expression evaluation. Commas are allowed in MACRO-10 expressions; for example:

777777,,666666

combines two 18-bit values (0o777777 and 0o666666) into a single 36-bit value (0o777777666666). But I’m not aware of a single comma meaning anything to MACRO-10, and it’s pretty clear that the comma in that IFG is just a typo, so I’m not going to try to replicate MACRO-10’s behavior here.

The PCjs expression evaluator (which is what my MACRO-10 Mini-Assembler uses) is OK with the comma, but not because it supports a comma operator (it doesn’t); it simply allows numbers to contain commas, in case the user is using commas to group digits. So “2,” is the same as “2”.

DAKAI.TXT

MAINDEC-10-DAKAI.TXT






 
			IDENTIFICATION
			--------------

	PRODUCT CODE:   MAINDEC-10-DAKAI-B-D

	PRODUCT NAME:   DECSYSTEM10 PDP-10 KA10 BASIC
	                INSTRUCTION DIAGNOSTIC (9)

	FUNCTION:       SHIFT-ROTATE TEST (PART 1)

	VERSION:        0.2

	DATE RELEASED:  JANUARY 1977

	MAINTAINED BY:  DIAGNOSTIC ENGINEERING GROUP

	AUTHOR:         JOHN R. KIRCHOFF

COPYRIGHT(C) 1976,1977
DIGITAL EQUIPMENT CORPORATION
MARLBORO, MASS. 01752

THIS SOFTWARE IS FURNISHED UNDER A LICENSE FOR USE ONLY
ON A SINGLE COMPUTER SYSTEM AND MAY BE COPIED ONLY WITH
THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE,
OR ANY OTHER COPIES THEREOF, MAY NOT BE PROVIDED OR OTHERWISE
MADE AVAILABLE TO ANY OTHER PERSON EXECPT FOR USE ON SUCH SYSTEM
AND TO ONE WHO AGREES TO THESE LICENSE TERMS.  TITLE TO AND
OWNERSHIP OF THE SOFTWARE SHALL AT ALL TIMES REMAIN IN DEC.

THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT
NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
EQUIPMENT CORPORATION.

DEC ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DEC.

							MAINDEC-10-DAKAI.TXT
							PAGE 2

			TABLE OF CONTENTS
			-----------------

1.0	ABSTRACT

2.0	REQUIREMENTS

2.1	EQUIPMENT

2.2	STORAGE

2.3	PRELIMINARY PROGRAMS

3.0	PROGRAM PROCEDURES

3.1	LOADING PROCEDURE

3.2	STARTING PROCEDURE

3.3	OPERATING PROCEDURE

4.0	DATA SWITCH FUNCTIONS

5.0	ERRORS

6.0	ITERATION COUNTER

7.0	CYCLE TIME

8.0	OPERATIONAL VARIATIONS

9.0	MISCELLANEOUS

10.0	LISTING

							MAINDEC-10-DAKAI.TXT
							PAGE 3

1.0	ABSTRACT

	THIS PDP-10 KA10 BASIC INSTRUCTION DIAGNOSTIC IS THE
	NINTH IN A SERIES OF PDP-10 KA10 PROCESSOR DIAGNOSTICS.
	THE DIAGNOSTIC TESTS THE SHIFTING AND ROTATING INSTRUCTIONS.

2.0	REQUIREMENTS

2.1	EQUIPMENT

	A PDP-10 KA10 EQUIPPED WITH A MINIMUM OF 32K OF MEMORY

	PAPER TAPE READER 
	CONSOLE TELETYPE
	DECTAPE
	LINE PRINTER (OPTIONAL)

2.2	STORAGE

	THE PROGRAM RUNS WITHIN 32K OF MEMORY.

2.3	PRELIMINARY PROGRAMS

	PREVIOUS PROCESSOR DIAGNOSTICS

3.0	PROGRAM PROCEDURES

3.1	LOADING PROCEDURE

	THIS DIAGNOSTIC REQUIRES THAT THE DECSYSTEM10 SUBROUTINE
	PROGRAM BE RESIDENT IN THE PDP-10.

	PAPER TAPE - HARDWARE READ-IN (READER DEVICE CODE 104)
	DECTAPE - LOAD WITH DIAMON (DECTAPE DEVICE CODE 320)
	TIME SHARING - RUN UNDER DIAMON.

							MAINDEC-10-DAKAI.TXT
							PAGE 4

3.2	STARTING PROCEDURE

	A.  SELECT OPERATIONAL CONSOLE DATA SWITCH SETTINGS (REFER TO
	    4.0 DATA SWITCH FUNCTIONS).

	B.  EXEC MODE

	    STAND-ALONE STARTING ADDRESS IS 30000.

	C.  USER MODE

	    RUN UNDER "DIAMON".
	    IN USER MODE THE FOLLOWING QUESTIONS WILL BE ASKED TO 
	    SELECT THE OPERATIONAL SWITCHES:

		    TELETYPE SWITCH CONTROL ? 0,S,Y OR N (CR) -

		    IF THE OPERATOR TYPES "N", THE ACTUAL CONSOLE
		    SWITCHES ARE USED.

		    IF THE OPERATOR TYPES "Y", THE FOLLOWING QUESTIONS
		    ARE ASKED AND THE OPERATOR RESPONDS BY TYPING
		    THE ANSWER AS SIX OCTAL DIGITS REPRESENTING
		    THE DESIRED SWITCH SETTINGS.

		    SPECIFY LH SWITCHES IN OCTAL-

		    SPECIFY RH SWITCHES IN OCTAL-

		    IF THE OPERATOR TYPES "0", ZERO'S ARE USED FOR
		    THE SWITCH SETTINGS.

		    IF THE OPERATOR TYPES "S", PREVIOUSLY SET SWITCHES
		    ARE USED.  THIS IS ONLY VALID UPON RESTARTING
		    OF AN INTERRUPTED PROGRAM.
	
							MAINDEC-10-DAKAI.TXT
							PAGE 5

3.3	OPERATING PROCEDURE

	A.  TO THROUGHLY TEST ALL HARDWARE, ALL TEST CONTROL DATA 
	    SWITCHES SHOULD BE SET TO 0.

	B.  WHEN DEBUGGING HARDWARE, SET SWITCHES TO 0.  ALLOW THE 
	    TELETYPE TO PRINT THE ERROR MESSAGES.  THIS ALLOWS THE 
	    PROGRAM TO RUN A COMPLETE PASS AND THEN THE ERROR MESSAGES
	    MAY BE CORRELATED TO QUICKLY DIAGNOSE THE FAILURE.  IF A
	    HARDWARE PROBLEM IS SUCH THAT THE ERROR MESSAGES, AFTER THE
	    FIRST ONE, HAVE NO MEANING (FIRST ERROR CAUSES ALL FOLLOWING
	    TESTS TO FAIL) SET THE LOOP ON ERROR SWITCH AND RESTART THE
	    TEST FROM THE BEGINNING.  THE FIRST FAILURE WILL THEN CAUSE
	    THE PROGRAM TO ENTER A LOOP SUITABLE FOR SCOPING.

	    THE ERROR MESSAGE USED IN CONJUNCTION WITH THE LISTING AND
	    SCOPING IF NECESSARY SHOULD ALLOW THE FAILING CONPONENT 
	    TO BE ISOLATED AND REPLACED AND/OR REPAIRED.

	C.  WHEN TAKING MARGINS, SET DATA SWITCHES 'NOPNT' AND 'DING'.
	    THIS WILL INHIBIT PRINTOUT BUT WILL ALLOW THE TELETYPE
	    BELL TO BE RUNG WHEN A ERROR OCCURS.  IF THE MARGIN OBTAINED
	    IS UNACCEPTABLE, THE OPERATOR MAY REVERT TO STANDARD SWITCH
	    SETTINGS FOR DEBUGGING PURPOSES.

	D.  ERROR INFORMATION MAY BE OBTAINED QUICKLY BY PRINTING 
	    ERRORS ON THE LINE PRINTER.

	E.  IN THE EVENT OF A PRINT ROUTINE FAILURE THE 'NOPNT' SWITCH
	    AND THE 'ERSTOP' SWITCH MAY BE SET TO INHIBIT PRINTOUT 
	    BUT HALT THE PROGRAM POINTING TO THE ERROR.

							MAINDEC-10-DAKAI.TXT
							PAGE 6

4.0	DATA SWITCH FUNCTIONS

	SWITCH		STATE	FUNCTION
	------		-----	--------

	0    ABORT	0	NORMAL OPERATION
			1	ABORT AT END OF PASS

	1    RSTART		NOT USED

	2    TOTALS		NOT USED

	3    NOPNT	0	NORMAL TYPEOUT
			1	INHIBIT ALL PRINT/TYPEOUT
				(EXCEPT FORCED)

	4    PNTLPT	0	NORMAL OUTPUT TO TTY
			1	PRINT ALL DATA ON LPT
				(LOGICAL DEVICE, USER MODE)

	5    DING	0	NO FUNCTION
			1	RING TTY BELL ON ERROR

	6    LOOPER	0	PROCEED TO NEXT TEST
			1	ENTER SCOPE LOOP ON TEST ERROR

	7    ERSTOP	0	NO FUNCTION
			1	HALT ON TEST ERROR

	8    PALERS	0	PRINT ONLY FIRST ERROR WHEN LOOPING
			1	PRINT ALL ERRORS, EVEN IF SAME ERROR

	9    RELIAB		NOT USED

	10   TXTINH	0	PRINT FULL ERROR MESSAGES.
			1	INHIBIT COMMENT PORTION OF 
				ERROR MESSAGES.

	11   INHPAG	0	ALLOW PAGING AND TRAP ENABLE
			1	INHIBIT PAGING AND TRAPPING

	12   MODDVC		NOT USED

	13   INHCSH		NOT USED
	
							MAINDEC-10-DAKAI.TXT
							PAGE 7

5.0	ERRORS

	ERRORS ARE PRINTED ON THE TTY OR LINE PRINTER.  THE ERROR 
	PRINTOUT CONTAINS THE TEST TITLE, THE PC OF THE FAILURE, ERROR
	NUMBER AND THE CONTENTS OF AN APPLICABLE AC.

	THE PC VALUE IS USEFUL IN RELATING THE FAILURE TO THE LISTING.
	THE ERROR NUMBER IS PROVIDED SUCH THAT AN ERROR DICTIONARY MAY
	BE MADE AT SOME FUTURE DATE.

	WHEN THE SCOPE LOOP MODE IS USED THE MI REGISTER WILL COUNT 
	FOR EACH OCCURANCE OF AN ERROR.  IF AN AUDIO INDICATION OF
	A CONTINUING ERROR IS DESIRED THE 'DING' SWITCH MAY BE SET.

6.0	ITERATION COUNTER

	THE ITERATION COUNT OF THE PROGRAM IS DISPLAYED IN THE MEMORY
	INDICATORS (MI).  THIS COUNT IS A DECREMENTING COUNT AND 
	INITIALLY STARTS AT -1 IN STAND-ALONE OPERATION.

7.0	CYCLE TIME

	THE CYCLE TIME OF THE PROGRAM IS IN THE MILLISECOND RANGE AND
	IS THEREFORE SUITABLE FOR TAKING MARGINS, VIBRATION TESTS,
	ETC.
							MAINDEC-10-DAKAI.TXT
							PAGE 8

8.0	OPERATIONAL VARIATIONS

	A.  DIAGNOSTIC MONITOR

	    THE PROGRAM IS USABLE WITH THE DIAGNOSTIC MONITOR TO PROVIDE
	    RELIABILITY TESTS, ACCEPTANCE TESTS, AND/OR TO PROVIDE A
	    QUICK METHOD OF ISOLATION OF A FAULT TO A PARTICULAR AREA
	    OF THE PROCESSOR.  CERTAIN PROCEDURES ARE USED WHEN THE
	    PROGRAM IS USED IN THIS MANNER.  THEY ARE:

	    1.	THE DIAGNOSTIC MONITOR TRANSFERS CONTROL TO THE PROGRAM
		AND STARTS IT AT LOCATION 30002.

	    2.	MONCTL - LOCATION 30043 IS USED AS THE DIAGNOSTIC MONITOR
		CONTROL WORD.
			LH = 0, STAND-ALONE OPERATION
			    -1, RUNNING UNDER DIAGNOSTIC MONITOR

			RH = RIGHT HALF OF CONSOLE SWITCHES IF UNDER
			     DIAGNOSTIC MONITOR CONTROL.

	B.  USER MODE

	    TO OUTPUT THE PRINTED ERROR MESSAGES TO A USER SPECIFIED
	    DEVICE IN USER MODE, ASSIGN THE DESIRED OUTPUT DEVICE TO
	    DEVICE NAME 'DEV' AND SET SWITCH 'PNTLPT'.  THE PHYSICAL
	    DEVICE USED CAN BE ANY DEVICE THAT CAN ACCEPT ASCII OUTPUT
	    FORMAT SUCH AS LPT, DSK, DTA, ETC.  THE CORRESPONDING 
	    OUTPUT FILE IS 'DAKAI.TMP'

	    EXAMPLE DEVICE ASSIGNMENT:

	    .ASSIGN DSK DEV

	    IN USER MODE THE PROGRAM WILL MAKE 1000(8) PASSES AND THEN
	    RETURN TO DIAMON COMMAND MODE.
	    
							MAINDEC-10-DAKAI.TXT
							PAGE 9

8.0	OPERATIONAL VARIATIONS (CON'T)

	THE OUTPUT FILE (IF USED) MAY THEN BE LISTED BY USING THE
	NORMAL MONITOR COMMANDS (PRINT, LIST, TYPE, PIP, ETC.).

	IF THE PROGRAM IS ABORTED BEFORE COMPLETION (BY ^C, ETC.) THE
	OUTPUT FILE MAY BE CLOSED BY USING THE MONITOR 'REENTER' 
	COMMAND.

	C.  SYSTEM EXERCISER

	    START ADDRESS IS 30003.  DATA SWITCHES ARE PRESTORED IN
	    'SWTEXR' LOC 30023.

9.0	MISCELLANEOUS

	THE NON-EX-MEMORY AND PARITY STOP SWITCHES SHOULD BE RESET 
	(0).  THESE ERRORS, ILLEGAL UUO'S AND OTHER ERRORS OF THIS
	TYPE ARE HANDLED BY PRINTOUT ON THE TELETYPE.

10.0	LISTING

DAKAI.HST

    THIS IS A HISTORY OF THE DEVELOPMENT OF MAINDEC-10-DAKAI

************************************************************************

PRODUCT CODE:       MAINDEC-10-DAKAI

PRODUCT NAME:       BASIC INSTRUCTION DIAGNOSTIC #9

DATE RELEASED:      JANUARY 1977

VERSION:            0.2

UPDATE AUTHOR:      JOHN R. KIRCHOFF

CHANGES MADE:

    1. UPGRADE TO ALLOW COMPATABILITY WITH THE SUBROUTINE PACKAGE.

************************************************************************

ORIGINAL VERSION:   0.1

ORIGINAL AUTHOR:    RICHARD MALISKA

ORIGINAL RELEASE:   16-MAR-72

************************************************************************

DAKAI.MAC

[Download]

;DAKAI

	MCNVER==0
	DECVER==2


	XLIST
DEFINE	NAME	(MCNVER,DECVER)<

TITLE	DAKAI PDP-10  KA10 BASIC INSTRUCTION DIAGNOSTIC (9) MCNVER,DECVER
>
	LIST
	LALL

	NAME	\MCNVER,\DECVER

;(LOGICAL SHIFT, ROTATE, ARITHMETIC SHIFT; SINGLE AND COMBINED)

;COPYRIGHT 1975,1977
;DIGITAL EQUIPMENT CORPORATION
;MARLBORO, MASS. 01752

;JOHN R. KIRCHOFF

	LOC	137
	MCNVER,,DECVER

	NOSYM
SUBTTL	DIAGNOSTIC PARAMETERS

;OPERATOR DEFINITIONS

OPDEF	ER1	[1B8]
OPDEF	ER2	[2B8]
OPDEF	ER3	[3B8]
OPDEF	ER4	[4B8]
OPDEF	ER5	[5B8]
OPDEF	ER6	[6B8]
OPDEF	ER7	[7B8]
OPDEF	ER10	[10B8]
OPDEF	ER11	[11B8]
OPDEF	ER12	[12B8]
OPDEF	ER13	[13B8]

;LUUO1=ERRMES
;LUUO2=ERRMES
;LUUO3=ERRMES
;LUUO4=ERRMES
;LUUO5=ERRMES
;LUUO6=ERRMES
;LUUO7=ERRMES
;LUUO10=ERRMES
;LUUO11=ERRMES
;LUUO12=ERRMES
;LUUO13=ERRMES
;SUBROUTINE ASSEMBLY DEFINITIONS

KLOLD==1
DEBUG=40
EXCASB=1
USRASB=1
KA10=1
PGMEND=1
ERDIAG=1

;SPECIAL FEATURE DEFINITIONS

;SADR1=BEGIN
;SADR2=BEGIN
;SADR3=BEGIN
;SADR4=BEGIN
;SADR5=JRST BEGIN
;SADR6=JRST BEGIN
;SADR7=JRST BEGIN
;SADR8=JRST BEGIN
;SADR9=JRST BEGIN
;SADR10=JRST BEGIN
;SADR11=JRST BEGIN

;SPECIAL FEATURE PARAMETERS

PAREA0=0
PAREA1=0
PAREA2=0
PAREA3=SIXBIT/DAKAI/
PAREA4=SIXBIT/TMP/
PAREA5=0
PAREA6=0
ITERAT==1000

;MACROS

DEFINE	SAVEAC	(A,B)<
	MOVEI	AC+2,.		;SAVE TEST PC
	MOVEM	AC+2,TESTPC
	MOVEI	AC+2,<AC+2>&17	;INFORM ERROR ROUTINE WHICH
	MOVEM	AC+2,ERRLOP#	;AC IS USED FOR ITERATION>

DEFINE	SETACS	(WW,XX)<
	MOVEI	AC-1,WW		;SETUP AC-1
	HRLI	AC-1,WW		;FOR COMPARISION
	MOVE	AC-2,<AC-1>&17	;SETUP AC-2 FOR COMPARISON
	MOVEI	AC,XX		;SETUP AC RIGHT
	HRLI	AC,XX		;SETUP AC LEFT
	MOVEM	AC,<AC+1>&17	;SETUP AC2>
;USER DEFINED MACROS

DEFINE	SR1	(T,D1A,D1B,R1A,R1B,OP,S)<
;THIS MACRO SHIFTS/ROTATES THE DATA SPECIFIED IN [XWD D1A,D1B] S BIT
;POSITIONS AND COMPARES THE RESULT IN THE AC TO THE DATA SPECIFIED IN [XWD R1A,R1B]
;IT ALSO CHECKS THAT C(AC+1) WAS NOT MODIFIED

E'T'00:	MOVE	AC,[XWD D1A,D1B]	;INITIALIZE AC
	MOVE	AC+1,[XWD 741703,607417];INITIALIZE AC+1
	OP	AC,S			;*SHIFT/ROTATE S BIT POSITIONS
	CAME	AC,[XWD R1A,R1B]	;IS RESULT IN AC CORRECT?
	ER3	AC,T'01			;RESULT IN AC IS INCORRECT
	CAME	AC+1,[XWD 741703,607417]
	ER4	AC+1,T'01		;C(AC+1) WAS MODIFIED INCORRECTLY
	JUMPL	AC+2,E'T'00		;LOOP ON ERROR SWITCH>


DEFINE	SR2	(T,D1A,D1B,D2A,D2B,R1A,R1B,R2A,R2B,OP,S)<
;THIS MACRO PERFORMS A COMBINED SHIFT/ROTATE OPERATION ON THE
;DATA SPECIFIED IN [XWD D1A,D1B] AND [XWD D2A,D2B] S BIT POSITIONS AND
;COMPARES THE RESULT IN AC AND AC+1 TO THE DATA SPECIFIED IN [XWD R1A,R1B] AND
;[XWD R2A,R2B]

E'T'00:	MOVE	AC,[XWD D1A,D1B]	;INITIALIZE AC
	MOVE	AC+1,[XWD D2A,D2B]	;INITIALIZE AC+1
	OP	AC,S			;*SHIFT/ROTATE COMBINED S PLACES
	CAME	AC,[XWD R1A,R1B]	;IS RESULT IN AC CORRECT?
	ER3	AC,T'01			;RESULT IN AC IS INCORRECT
	CAME	AC+1,[XWD R2A,R2B]	;IS RESULT IN AC+1 CORRECT?
	ER4	AC+1,T'01		;RESULT IN AC+1 IS INCORRECT
	JUMPL	AC+2,E'T'00		;LOOP ON ERROR SWITCH>

EXIT:	;DROPDV			;CLOSE LOGICAL OUTPUT FILE
	;EXIT

PGMNAM:	ASCIZ/
PDP-10 KA10 BASIC INSTRUCTION DIAGNOSTIC #9 SHIFT-ROTATE [DAKAI]
/

TESTPC:	0		;SUBTEST PC

;INITIALIZE SUBROUTINES

	LOC	30623

START:	;PGMINT
	;MOVE	[ASCIZ/AI/]
	;MOVEM	TLET

STARTA:	JRST	E00		;GO PERFORM DIAGNOSTIC
SUBTTL	DIAGNOSTIC SECTION - TEST FETCH, STORE AND DECODE FUNCTIONS

;TEST FETCH,STORE AND DECODE
;TEST THE ABILITY OF ROT, ROTC TO FETCH AND STORE
;AC,AC+1
;TESTING IS ACCOMPLISHED BY ROTATING ZERO TIMES ALL
;ZERO'S, ALL ONE'S.
;OPERANDS SELECTED ARE LEAST AFFECTED BY
;INADVERTENT ROTATING
;FAILURE OF A SC BIT TO SET,OR SC TO
;COUNT WILL RESULT IN LOOPING


	AC=1
E00:	SAVEAC	(1,1)

E100:	SETZ	AC,		;CLEAR AC
	ROT	AC,0		;*ROTATE LEFT ZERO TIMES
	SKIPE	AC		;TEST AC FOR ZERO
	ER3	AC,101		;FETCH OR STORE FAILED
	JUMPL	AC+2,E100	;LOOP ON ERROR SWITCH

E200:	SETOB	AC,AC-1		;SET AC,AC-1 FOR COMPARE
	ROT	AC,0		;*ROTATE LEFT ZERO TIMES
	CAME 	AC,AC-1		;TEST AC FOR A -1
	ER3	AC,201		;FETCH OR STORE FAILED
	JUMPL	AC+2,E200	;LOOP ON ERROR SWITCH

	AC=2
	SAVEAC	(1,1)

E300:	SETZB	AC,AC+1		;CLEAR AC,AC+1
	ROTC	AC,0		;*ROTATE COMBINED LEFT ZERO TIMES
	SKIPE	AC		;TEST AC FOR ZERO
	ER3	AC,301		;FETCH OR STORE AC FAILED
	SKIPE	AC+1		;TEST AC+1 FOR ZERO
	ER4	AC+1,301	;FETCH OR STORE AC+1 FAILED
	JUMPL	AC+2,E300	;LOOP ON ERROR SWITCH

E400:	SETO	AC-1,		;SET UP FOR COMPARISON
	SETOB	AC,AC+1		;SET AC,AC+1
	ROTC	AC,0		;*ROTATE COMBINED LEFT ZERO TIMES
	CAME	AC,AC-1		;TEST AC FOR A -1
	ER3	AC,401		;FETCH OR STORE AC FAILED
	CAME	AC+1,AC-1	;TEST AC+1 FOR A -1
	ER4	AC+1,401	;FETCH OR STORE AC+1 FAILED
	JUMPL	AC+2,E400	;LOOP ON ERROR SWITCH
;TEST FETCH,STORE AND DECODE
;TEST THE ABILITY OF LSH, LSHC TO FETCH AND STORE
;AC,AC+1
;TESTING IS ACCOMPLISHED BY SHIFTING ZERO TIMES ALL
;ZERO'S ALL ONE'S
;OPERANDS SELECTED ARE LEAST AFFECTED BY
;INADVERTENT SHIFTING
;FAILURE OF A SC BIT TO SET,OR SC TO
;COUNT WILL RESULT IN LOOPING

	AC=3
	SAVEAC	(1,1)

E500:	SETZ	AC,		;CLEAR AC
	LSH	AC,0		;*SHIFT LEFT ZERO TIMES
	SKIPE	AC		;TEST AC FOR ZERO
	ER3	AC,501		;FETCH OR STORE AC FAILED
	JUMPL	AC+2,E500	;LOOP ON ERROR SWITCH

E600:	SETOB	AC,AC-1		;SET AC,AC-1 FOR COMPARE
	LSH	AC,0		;*SHIFT LEFT ZERO TIMES
	CAME	AC,AC-1		;TEST AC FOR -1
	ER3	AC,601		;FETCH OR STORE AC FAILED
	JUMPL	AC+2,E600	;LOOP ON ERROR SWITCH

	AC=14
	SAVEAC	(1,1)

E700:	SETZB	AC,AC+1		;CLEAR AC,AC+1
	LSHC	AC,0		;*SHIFT COMBINED LEFT ZERO TIMES
	SKIPE	AC		;TEST AC FOR 0
	ER3	AC,701		;FETCH OR STORE AC FAILED
	SKIPE	AC+1		;TEST AC+1 FOR 0
	ER4	AC+1,701	;FETCH OR STORE AC+1 FAILED
	JUMPL	AC+2,E700	;LOOP ON ERROR SWITCH

E1000:	SETO	AC-1,		;SET UP FOR COMPARISON
	SETOB	AC,AC+1		;SET AC,AC+1
	LSHC	AC,0		;*SHIFT COMBINED LEFT ZERO TIMES
	CAME	AC,AC-1		;TEST AC FOR -1
	ER3	AC,1001		;FETCH OR STORE AC FAILED
	CAME	AC+1,AC-1	;TEST AC+1 FOR -1
	ER4	AC+1,1001	;FETCH OR STORE AC+1 FAILED
	JUMPL	AC+2,E1000	;LOOP ON ERROR SWITCH
;TEST FETCH,STORE AND DECODE
;TEST THE ABILITY OF ASH, ASHC TO FETCH AND STORE
;AC,AC+1
;TESTING IS ACCOMPLISHED BY SHIFTING ZERO TIMES ALL
;ZERO'S ALL ONES
;OPERANDS SELECTED ARE LEAST AFFECTED BY
;INADVERTENT SHIFTING
;FAILURE OF A SC BIT TO SET,OR SC TO
;COUNT WILL RESULT IN LOOPING

	AC=13
	SAVEAC	(1,1)

E1100:	SETZ	AC,		;CLEAR AC
	ASH	AC,0		;*SHIFT LEFT ZERO TIMES
	SKIPE	AC		;TEST AC FOR ZERO
	ER3	AC,1101		;FETCH OR STORE AC FAILED
	JUMPL	AC+2,E1100	;LOOP ON ERROR SWITCH

E1200:	SETOB	AC,AC-1		;SET AC,AC-1 FOR COMPARE
	ASH	AC,0		;*SHIFT LEFT ZERO TIMES
	CAME	AC,AC-1		;TEST AC FOR A -1
	ER3	AC,1201		;FETCH OR STORE AC FAILED
	JUMPL	AC+2,E1200	;LOOP ON ERROR SWITCH

	AC=12
	SAVEAC	(1,1)

E1300:	SETZB	AC,AC+1		;CLEAR AC,AC+1
	ASHC	AC,0		;*SHIFT COMBINED LEFT ZERO TIMES
	SKIPE	AC		;TEST AC FOR 0
	ER3	AC,1301		;FETCH OR STORE AC FAILED
	SKIPE	AC+1		;TEST AC+1 FOR 0
	ER4	AC+1,1301	;FETCH OR STORE AC+1 FAILED
	JUMPL	AC+2,E1300	;LOOP ON ERROR SWITCH

E1400:	SETO	AC-1,		;SET UP FOR COMPARISON
	SETOB	AC,AC+1		;SET AC,AC+1
	ASHC	AC,0		;*SHIFT COMBINED LEFT ZERO TIMES
	CAME	AC,AC-1		;TEST AC FOR A -1
	ER3	AC,1401		;FETCH OR STORE AC FAILED
	CAME	AC+1,AC-1	;TEST AC+1 FOR A -1
	ER4	AC+1,1401	;FETCH OR STORE AC+1 FAILED
	JUMPL	AC+2,E1400	;LOOP ON ERROR SWITCH
SUBTTL	DIAGNOSTIC SECTION - CHECK SIGN BIT OF AC+1 FOR ASHC

;VERIFY THAT THE SIGN BIT OF AC+1 IS NOT MADE TO AGREE WITH THE SIGN BIT OF AC
;WHEN THE 'E' FIELD OF ASHC SECIFIES A SHIFT OF ZERO BIT POSITIONS.
;HENCE, C(AC+1) IS NOT ALTERE BY 'ASHC AC,0'.
;CHECK THIS WHEN THE SIGN BIT OF AC IS ZERO AND THE SIGN BIT OF AC+1 IS ONE.

	SR2	(443,0,0,-1,-1,0,0,-1,-1,ASHC,0)

;VERIFY THAT THE SIGN BIT OF AC+1 IS NOT MADE TO AGREE WITH THE SIGN BIT OF AC
;WHEN THE 'E' FIELD OF ASHC SECIFIES A SHIFT OF ZERO BIT POSITIONS.
;HENCE, C(AC+1) IS NOT ALTERE BY 'ASHC AC,0'.
;CHECK THIS WHEN THE SIGN BIT OF AC IS ONE AND THE SIGN BIT OF AC+1 IS ZERO.
	SR2	(444,-1,-1,0,0,-1,-1,0,0,ASHC,0)
SUBTTL	DIAGNOSTIC SECTION - TEST MQ-ADDER GATING

	AC=10
	SAVEAC	(1,1)

SN=1500
	ZZ=0
			;CHECK AC+1 RIGHT <
E1500:	REPEAT	^D18,<

;VERIFY MQ-AD GATING
;ROTC A RIPPLED ONE ZERO POSITIONS IN AC+1
;FIRST CLEAR AC; THEN, SET ONE BIT OF AC+1
;REPEAT FOR ALL 36 BITS OF MQ
;RESULT IN AC+1 SHOULD BE SAME AS INTIALIZATION DATA
SN=SN+1
	ZZ=ZZ+ZZ			;TESTED BIT
	IFE	ZZ,<ZZ=1>
	SETZM	AC			;CLEAR AC
	MOVEI	AC+1,ZZ			;INITIALIZE AC+1
	ROTC	AC,0		;*ROT 0 BIT POSIOTIONS
	CAIE	AC+1,ZZ			;CHECK BIT (N) OF AC+1
	ER4	AC+1,SN			;MQ-AD GATE FAILED
	JUMPL	AC+2,.-5		;LOOP ON ERROR SWITCH
>
PAGE
ZZ=0
			;CHECK AC+1 LEFT <
	REPEAT	^D18,<

;VERIFY MQ-AD GATING
;ROTC A RIPPLED ONE ZERO POSITIONS IN AC+1
;FIRST CLEAR AC; THEN, SET ONE BIT OF AC+1
;REPEAT FOR ALL 36 BITS OF MQ
;RESULT IN AC+1 SHOULD BE SAME AS INITIALIZATION DATA
SN=SN+1
	ZZ=ZZ+ZZ			;TESTED BIT
	IFE	ZZ,<ZZ=1>
	SETZM	AC			;CLEAR AC
	MOVSI	AC+1,ZZ			;INITIALIZE AC+1
	MOVE	AC-1,AC+1		;SETUP FOR COMPARISON
	ROTC	AC,0		;*ROT 0 BIT POSITIONS
	CAME	AC+1,AC-1		;CHECK BIT (N) OF AC+1
	ER4	AC+1,SN			;MQ-AD GATE FAILED
	JUMPL	AC+2,.-5		;LOOP ON ERROR SWITCH
>
	AC=7
	SAVEAC	(1,1)

SN=1600

	ZZ=0

			;CHECK AC+1 RIGHT <
E1600:	REPEAT	^D18,<

;VERIFY MQ-AD GATING
;ROTC A RIPPLED ZERO ZERO POSITIONS IN AC+1
;FIRST SET AC TO ALL ONES; THEN, SET ALL BUT ONE BIT OF AC+1
;REPEAT FOR ALL 36 BITS OF MQ
;RESULT IN AC+1 SHOULD BE SAME AS INITIALIZATION DATA
SN=SN+1
	ZZ=ZZ+ZZ+1			;TESTED BIT
	IFE	ZZ,<ZZ=-2>
	SETOM	AC			;INITIALIZE TO ALL ONES
	HRROI	AC+1,ZZ&777777		;INITIALIZE AC+1
	MOVE	AC-1,AC+1		;SETUP FOR COMPARISON
	ROTC	AC,0		;*ROT 0 BIT POSITIONS
	CAME	AC+1,AC-1		;CHECK BIT (N) OF AC+1
	ER4	AC+1,SN			;MQ-AD GATE FAILED
	JUMPL	AC+2,.-6		;LOOP ON ERROR SWITCH
>
PAGE
ZZ=0
			;CHECK AC+1 LEFT <
	REPEAT	^D18,<

;VERIFY MQ-AD GATING
;ROTC A RIPPLED ZERO ZERO POSIOTIONS IN AC+1
;FIRST SET AC TO ALL ONES; THEN, SET ALL BUT ONE BIT OF AC+1
;REPEAT FOR ALL 36 BITS OF MQ
;RESULT IN AC+1 SHOULD BE SAME AS INITIALIZATION DATA
SN=SN+1
	ZZ=ZZ+ZZ+1			;TESTED BIT
	IFE	ZZ,<ZZ=-2>
	SETOM	AC			;INITIALIZE	AC TO ALL ONES
	HRLOI	AC+1,ZZ&777777		;INITIALIZE AC+1
	MOVE	AC-1,AC+1		;SETUP FOR COMPARISON
	ROTC	AC,0		;*ROT 0 BIT POSITIONS
	CAME	AC+1,AC-1		;CHECK BIT (N) OF AC+1
	ER4	AC+1,SN			;MQ-AD GATE FAILED
	JUMPL	AC+2,.-6		;LOOP ON ERROR SWITCH
>
SUBTTL	DIAGNOSTIC SECTION - BASIC SHIFT TEST (0,1,-1,-2 BIT POSITIONS)

;BASIC SHIFT TEST
;TEST ABILITY TO SHIFT A BIT 0,1,-1 AND -2 POSITIONS

	AC=4
	SAVEAC	(1,1)

;TEST ABILITY TO SHIFT A BIT ZERO POSITIONS USING LSH
	SR1	(17,0,10,0,10,LSH,0)

;TEST ABILITY TO SHIFT A BIT LEFT ONE POSITION USING LSH
	SR1	(20,0,10,0,20,LSH,1)

;TEST ABILITY TO SHIFT A BIT RIGHT ONE POSITION USING LSH
	SR1	(442,0,10,0,4,LSH,-1)

;TEST ABILITY TO SHIFT A BIT RIGHT TWO POSITIONS USING LSH
	SR1	(21,0,10,0,2,LSH,-2)
PAGE
;TEST ABILITY TO SHIFT A BIT ZERO POSITIONS USING LSHC
	SR2	(22,0,10,0,10,0,10,0,10,LSHC,0)

;TEST ABILITY TO SHIFT A BIT LEFT ONE POSITION USING LSHC
	SR2	(23,0,10,0,10,0,20,0,20,LSHC,1)

;TEST ABILITY TO SHIFT A BIT RIGHT ONE POSITION USING LSHC
	SR2	(24,0,10,0,10,0,4,0,4,LSHC,-1)

;TEST ABILITY TO SHIFT A BIT RIGHT TWO POSITIONS USING LSHC
	SR2	(25,0,10,0,10,0,2,0,2,LSHC,-2)
SUBTTL	DIAGNOSTIC SECTION - TEST SAC FUNCTION

	AC=10
	SAVEAC	(1,1)

SN=2600
	ZZ=1

		;TEST SAC
E2600:	REPEAT	^D3,<
SN=SN+1
;FURTHER TEST OF SAC,SAC2
;TEST FOR ASSERTION OF SAC INH
;TEST ASSUMES ABILITY TO ROTATE
;TO SOME DEGREE
	ZZ=ZZ+ZZ
	HRRZI	AC,400000	;SET BIT 18
	ROT	AC,ZZ		;*ROT LEFT (N) NUMBER OF TIMES
	CAIN	AC,400000	;TEST FOR SAC
	ER3	AC,SN		;STORE AC FAILED
	JUMPL	AC+2,.-4	;LOOP ON ERROR SWITCH
>
PAGE
SN=2700
	ZZ=1

		;TEST SAC
E2700:	REPEAT	^D3,<
SN=SN+1
;FURTHER TEST OF SAC,SAC2
;TEST FOR ASSERTION OF SAC INH
;TEST ASSUMES ABILITY TO ROTATE
;TO SOME DEGREE

	ZZ=ZZ+ZZ
	SETZ	AC,		;CLEAR AC
	HRRZI	AC+1,400000	;SET BIT 18
	ROTC	AC,ZZ		;*ROT LEFT (N) NUMBER OF TIMES
	CAIN	AC+1,400000	;TEST FOR SAC
	ER4	AC+1,SN		;STORE AC+1 FAILED
	JUMPL	AC+2,.-5	;LOOP ON ERROR SWITCH
>
SUBTTL	DIAGNOSTIC SECTION - TEST SHIFT LOGIC GATES BETWEEN AD AND AR

;TEST ROT LEFT ONE BIT POSITION USING ALL ZEROS
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF C(AC) IS NON-ZERO AFTER ROTATING

	AC=11
	SAVEAC	(1,1)

E3000:	SETZB	AC,AC-1		;INITIALIZE AC AND EXPECTED RESULT TO ZERO
	ROT	AC,1		;*ROTATE LEFT ONE
	CAME	AC,AC-1		;TEST AC FOR ALL ZEROS
	ER3	AC,3001		;AD-AR GATING FAILED
	JUMPL	AC+2,E3100	;LOOP ON ERROR SWITCH

;TEST ROT LEFT ONE BIT POSITION USING ALL ONES
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF C(AC) IS NOT ALL ONES AFTER ROTATING

E3100:	SETOB	AC,AC-1		;INITIALIZE AC AND EXPECTED RESULT TO ALL ONES
	ROT	AC,1		;*ROTATE LEFT ONE
	CAME	AC,AC-1		;TEST AC FOR ALL ONES
	ER3	AC,3101		;AD-AR GATING FAILED
	JUMPL	AC+2,E3100	;LOOP ON ERROR SWITCH
SN=3200
	ZZ=0

		;TEST AC RIGHT HALF <
E3200:	REPEAT 	^D18,<
;TEST ROT LEFT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ONE THROUGH THE 36 BITS OF THE AR
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF THE TESTED BIT IS ZERO AND/OR ANY OTHER BIT
;IS ONE AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ONE THROUGH ALL 36 BITS

SN=SN+1
	ZZ=ZZ+ZZ		;SELECTED BIT BEFORE ROTATION
	IFE	ZZ,<ZZ=1>
	YY=ZZ+ZZ		;SELECTED BIT AFTER ROTATION
	MOVEI	AC,ZZ		;SET BIT (N) OF AC RIGHT
	IFN	<ZZ-400000>,<
	MOVEI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ-400000>,<
	MOVSI	AC-1,1		;SETUP FOR COMPARISON>
	ROT	AC,1		;*ROTATE LEFT ONE
	CAME	AC,AC-1		;TEST FOR BIT (N-1) A ONE
	ER3	AC,SN		;AD-AR GATE UNDER TEST FAILED
	JUMPL	AC+2,.-5	;LOOP ON ERROR SWITCH
>
PAGE
	ZZ=0

		;TEST AC LEFT HALF <
	REPEAT	^D18,<;TEST ROT LEFT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ONE THROUGH THE 36 BITS OF THE AR
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF THE TESTED BIT IS ZERO AND/OR ANY OTHER BIT IS
;ONE AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ONE THROUGH ALL 36 BITS

SN=SN+1

	ZZ=ZZ+ZZ		;SELECTED BIT BEFORE ROTATION
	IFE	ZZ,<ZZ=1>
	YY=ZZ+ZZ		;SELECTED BIT AFTER ROTATION
	MOVSI	AC,ZZ		;SET BIT (N) OF AC LEFT
	IFN	<ZZ-400000>,<
	MOVSI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ-400000>,<
	MOVEI	AC-1,1		;SETUP FOR COMPARISON>
	ROT	AC,1		;*ROTATE LEFT ONE
	CAME	AC,AC-1		;TEST FOR BIT (N-1) A ONE
	ER3	AC,SN		;AD-AR GATE UNDER TEST FAILED
	JUMPL	AC+2,.-5	;LOOP ON ERROR SWITCH
>
SN=3300
	ZZ=0

	;TEST AC RIGHT HALF<
E3300:	REPEAT	^D18,<;TEST ROT LEFT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ZERO THROUGH THE 36 BITS OF THE AR
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF THE TESTED BIT IS ONE AND/OR ANY OTHER BIT
;IS ZERO AFTER ROTATING.
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ZERO THROUGH ALL 36 BITS

SN=SN+1
	ZZ=ZZ+ZZ+1		;SELECTED BIT BEFORE ROTATION
	IFE	<ZZ-1>,<ZZ=-2>
	YY=<ZZ+ZZ+1>&777777	;SELECTED BIT AFTER ROTATION
	HRROI	AC,ZZ&777777	;CLEAR BIT (N) OF AC RIGHT
	IFN	<<ZZ-377777>&377777>,<
	HRROI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<<ZZ-377777>&777777>,<
	HRLOI	AC-1,-2		;SETUP FOR COMPARISON>
	ROT	AC,1		;*ROTATE LEFT ONE
	CAME	AC,AC-1		;TEST FOR BIT (N-1) A ZERO
	ER3	AC,SN		;AD-AR GATE UNDER TEST FAILED
	JUMPL	AC+2,.-5	;LOOP ON ERROR SWITCH
>
PAGE
	ZZ=0
	;TEST AC LEFT HALF<
	REPEAT	^D18,<;TEST ROT LEFT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ZERO THROUGH THE 36 BITS OF THE AR
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF THE TESTED BIT IS ONE AND/OR ANY OTHER BIT
;IS ZERO AFTER ROTATING.
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ZERO THROUGH ALL 36 BITS

SN=SN+1
	ZZ=ZZ+ZZ+1		;SELECTED BIT BEFORE ROTATION
	IFE	<ZZ-1>,<ZZ=-2>
	YY=<ZZ+ZZ+1>&777777	;SELECTED BIT AFTER ROTATION
	HRLOI	AC,ZZ&777777	;CLEAR BIT (N) OF AC LEFT
	IFN	<<ZZ-377777>&777777>,<
	HRLOI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<<ZZ-377777>&777777>,<
	HRROI	AC-1,-2		;SETUP FOR COMPARISON>
	ROT	AC,1		;*ROTATE LEFT ONE
	CAME	AC,AC-1		;TEST FOR BIT (N-1) OR ZERO
	ER3	AC,SN		;AD-AR GATE UNDER TEST FAILED
	JUMPL	AC+2,.-5	;LOOP ON ERROR SWITCH
>

;TEST ROT RIGHT ONE BIT POSITION
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD.
;AN ERROR OCCURS IF C(AC) IS NON-ZERO AFTER ROTATING

	AC=10
	SAVEAC	(1,1)

E3400:	SETZB	AC,AC-1		;INITIALIZE AC AND EXPECTED RESULT TO ZERO
	ROT	AC,-1		;*ROTATE RIGHT ONE
	CAME	AC,AC-1		;TEST AC FOR ALL ZEROS
	ER3	AC,3401		;AD-AR GATING FAILED
	JUMPL	AC+2,E3400	;LOOP ON ERROR SWITCH

;TEST ROT RIGHT ONE BIT POSITION
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF C(AC) IS NOT ALL ONES AFTER ROTATING

E3500:	SETOB	AC,AC-1		;INITIALIZE AC AND EXPECTED RESULT TO ALL ONES
	ROT	AC,-1		;*ROTATE RIGHT ONE
	CAME	AC,AC-1		;TEST AC FOR ALL ONES.
	ER3	AC,3501		;AD-AR GATING FAILED
	JUMPL	AC+2,E3500	;LOOP ON ERROR SWITCH
SN=3600
	ZZ=0

		;TEST AC LEFT HALF<
E3600:	REPEAT	^D18,<;TEST ROT RIGHT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ONE THROUGH THE 36 BITS OF THE AR
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF THE TESTED BIT IS ZERO AND/OR ANY OTHER
;BIT IS ONE AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ONE THROUGH ALL 36 BITS

SN=SN+1
	ZZ=ZZ/2			;SELECTED BIT BEFORE ROTATION
	IFE	ZZ,<ZZ=400000>
	YY=ZZ/2			;SELECTED BIT AFTER ROTATION
	MOVSI	AC,ZZ		;SET BIT (N) OF AC LEFT
	IFN	<ZZ-1>,<
	MOVSI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ-1>,<
	MOVEI	AC-1,400000	;SETUP FOR COMPARISON>
	ROT	AC,-1		;*ROTATE RIGHT ONE
	CAME	AC,AC-1		;TEST FOR BIT (N+1) A ONE
	ER3	AC,SN		;AD-AR GATE UNDER TEST FAILED
	JUMPL	AC+2,.-5	;LOOP ON ERROR SWITCH
>
PAGE
	ZZ=0

		;TEST AC RIGHT HALF<
	REPEAT	^D18,<;TEST ROT RIGHT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ONE THROUGH THE 36 BITS OF THE AR
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF THE TESTED BIT IS ZERO AND/OR ANY OTHER BIT IS
;ONE AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ONE THROUGH ALL 36 BITS

SN=SN+1
	ZZ=ZZ/2			;SELECTED BIT BEFORE ROTATION
	IFE	ZZ,<ZZ=400000>
	YY=ZZ/2			;SELECTED BIT AFTER ROTATION
	MOVEI	AC,ZZ		;SET BIT (N) OF AC RIGHT
	IFN	<ZZ-1>,<
	MOVEI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ-1>,<
	MOVSI	AC-1,400000	;SETUP FOR COMPARISON>
	ROT	AC,-1		;*ROTATE RIGHT ONE
	CAME	AC,AC-1			;TEST FOR BIT (N+1) A ONE
	ER3	AC,SN		;AD-AR GATE UNDER TEST FAILED
	JUMPL	AC+2,.-5	;LOOP ON ERROR SWITCH
>
SN=3700
	ZZ=1

	;TEST AC LEFT HALF<
E3700:	REPEAT	^D18,<;TEST ROT RIGHT ONE BIT POSITION
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF THE TESTED BIT IS ONE AND/OR ANY OTHER BIT
;IS ZERO AFTER ROTATING.
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ZERO THROUGH ALL 36 BITS

SN=SN+1
	ZZ=<ZZ-1>/2		;SELECTED BIT BEFORE ROTATION
	IFE	<ZZ>,<ZZ=777777377777>
	YY=<<ZZ-1>/2>&777777	;SELECTED BIT AFTER ROTATION
	HRLOI	AC,ZZ&777777	;CLEAR BIT (N) OF AC LEFT
	IFN	<ZZ&777777-777776>,<
	HRLOI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ&777777-777776>,<
	HRROI	AC-1,377777	;SETUP FOR COMPARISON>
	ROT	AC,-1		;*ROTATE RIGHT ONE
	CAME	AC,AC-1		;TEST FOR BIT (N+1) A ZERO
	ER3	AC,SN		;AD-AR GATE UNDER TEST FAILED
	JUMPL	AC+2,.-5	;LOOP ON ERROR SWITCH
>
PAGE
	ZZ=1

	;TEST AC RIGHT HALF<
	REPEAT	^D18,<;TEST ROT RIGHT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ZERO THROUGH THE 36 BITS OF THE AR
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF THE TESTED BIT IS ONE AND/OR ANY OTHER BIT
;IS ZERO AFTER ROTATING.
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ZERO THROUGH ALL 36 BITS

SN=SN+1
	ZZ=<ZZ-1>/2		;SELECTED BIT BEFORE ROTATION
	IFE	<ZZ>,<ZZ=777777377777>
	YY=<<ZZ-1>/2>&777777	;SELECTED BIT AFTER ROTATION
	HRROI	AC,ZZ&777777	;CLEAR BIT (N) OF AC RIGHT
	IFN	<ZZ&777777-777776>,<
	HRROI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ&777777-777776>,<
	HRLOI	AC-1,377777	;SETUP FOR COMPARISON>
	ROT	AC,-1		;*ROTATE RIGHT ONE
	CAME	AC,AC-1		;TEST FOR BIT (N+1) A ZERO
	ER3	AC,SN		;AD-AR GATE UNDER TEST FAILED
	JUMPL	AC+2,.-5	;LOOP ON ERROR SWITCH
>
;TEST ROT RIGHT TWO BIT POSITIONS
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF C(AC) IS NON-ZERO AFTER ROTATING

	AC=7
	SAVEAC	(1,1)

E4000:	SETZB	AC,AC-1		;INITIALIZE AC AND EXPECTED RESULT TO ZERO
	ROT	AC,-2		;*ROTATE RIGHT TWO
	CAME	AC,AC-1		;TEST AC FOR ALL ZEROS
	ER3	AC,4001		;AD-AR GATING FAILED
	JUMPL	AC+2,E4000	;LOOP ON ERROR SWITCH

;TEST ROT RIGHT TWO BIT POSITIONS
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF C(AC) IS NOT ALL ONES AFTER ROTATING

E4100:	SETOB	AC,AC-1		;INITIALIZE AC AND EXPECTED RESULT TO ALL ONES
	ROT	AC,-2		;*ROTATE RIGHT TWO
	CAME	AC,AC-1		;TEST AC FOR ALL ONES.
	ER3	AC,4101		;AD-AR GATING FAILED
	JUMPL	AC+2,E4100	;LOOP ON ERROR SWITCH

SN=4200
	ZZ=0

		;TEST AC LEFT HALF<
E4200:	REPEAT	^D18,<;TEST ROT RIGHT TWO BIT POSITIONS
;TEST ABILITY TO ROTATE A ONE GHROUGH THE 36 BITS OF THE AR
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF THE TESTED BIT IS ZERO AND/OR ANY OTHER
;BIT IS ONE AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ONE THROUGH ALL 36 BITS

SN=SN+1
	ZZ=ZZ/2			;SELECTED BIT BEFORE ROTATION
	IFE	ZZ,<ZZ=400000>
	YY=ZZ/4			;SELECTED BIT AFTER ROTATION
	MOVSI	AC,ZZ		;SET BIT (N) OF AC LEFT
	IFG	<ZZ-2>,<
	MOVSI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ-2>,<
	MOVEI	AC-1,400000	;SETUP FOR COMPARISON>
	IFE	<ZZ-1>,<
	MOVEI	AC-1,200000	;SETUP FOR COMPARISON>
	ROT	AC,-2		;*ROTATE RIGHT TWO
	CAME	AC,AC-1		;TEST FOR BIT (N+2) A ONE
	ER3	AC,SN		;AD-AR GATE UNDER TEST FAILED
	JUMPL	AC+2,.-5	;LOOP ON ERROR SWITCH
>
PAGE
	ZZ=0

		;TEST AC RIGHT HALF <
	REPEAT	^D18,<;TEST ROT RIGHT TWO BIT POSITIONS
;TEST ABILITY TO ROTATE A ONE THROUGH THE 36 BITS OF THE AR
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF THE TESTED BIT IS ZERO AND/OR ANY OTHER BIT IS
;ONE AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ONE THROUGH ALL 36 BITS

SN=SN+1
	ZZ=ZZ/2			;SELECTED BIT BEFORE ROTATION
	IFE	ZZ,<ZZ=400000>
	YY=ZZ/4			;SELECTED BIT AFTER ROTATION
	MOVEI	AC,ZZ		;SET BIT (N) OF AC RIGHT
	IFG	<ZZ-2>,<
	MOVEI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ-2>,<
	MOVSI	AC-1,400000	;SETUP FOR COMPARISON>
	IFE	<ZZ-1>,<
	MOVSI	AC-1,200000	;SETUP FOR COMPARISON>
	ROT	AC,-2		;*ROTATE RIGHT TWO
	CAME	AC,AC-1		;TEST FOR BIT (N+2) A ONE
	ER3	AC,SN		;AD-AR GATE UNDER TEST FAILED
	JUMPL	AC+2,.-5	;LOOP ON ERROR SWITCH
>
SN=4300
	ZZ=1

		;TEST AC LEFT HALF<
E4300:	REPEAT	^D18,<;TEST ROT RIGHT TWO BIT POSITIONS
;TEST ABILITY TO ROTATE A ZERO THROUGH THE 36 BITS OF THE AR
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF THE TESTED BIT IS ONE AND/OR ANY OTHER BIT
;IS ZERO AFTER ROTATING.
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ZERO THROUGH ALL 36 BITS

SN=SN+1
	ZZ=<ZZ-1>/2		;SELECTED BIT BEFORE ROTATION
	IFE	<ZZ>,<ZZ=777777377777>
	YY=<<ZZ-3>/4>&777777	;SELECTED BIT AFTER ROTATION
	HRLOI	AC,ZZ&777777	;CLEAR BIT (N) OF AC LEFT
	IFL	<ZZ&777777-777775>,<
	HRLOI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ&777777-777775>,<
	HRROI	AC-1,377777	;SETUP FOR COMPARISON>
	IFE	<ZZ&777777-777776>,<
	HRROI	AC-1,577777	;SETUP FOR COMPARISON>
	ROT	AC,-2		;*ROTATE RIGHT TWO
	CAME	AC,AC-1		;TEST FOR BIT (N+2) A ZERO
	ER3	AC,SN		;AD-AR GATE UNDER TEST FAILED
	JUMPL	AC+2,.-5	;LOOP ON ERROR SWITCH
>
PAGE
	ZZ=1

		;TEST AC RIGHT HALF<
	REPEAT	^D18,<;TEST ROT RIGHT TWO BIT POSITIONS
;TEST ABILITY TO ROTATE A ZERO THROUGH THE 36 BITS OF THE AR
;TEST SHIFT LOGIC GATES BETWEEN AR AND AD
;AN ERROR OCCURS IF THE TESTED BIT IS ONE AND/OR ANY OTHER BIT
;IS ZERO AFTER ROTATING.
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ZERO THROUGH ALL 36 BITS

SN=SN+1
	ZZ=<ZZ-1>/2		;SELECTED BIT BEFORE ROTATION
	IFE	<ZZ>,<ZZ=777777377777>
	YY=<<ZZ-3>/4>&777777	;SELECTED BIT AFTER ROTATION
	HRROI	AC,ZZ&777777	;CLEAR BIT (N) OF AC RIGHT
	IFL	<ZZ&777777-777775>,<
	HRROI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ&777777-777775>,<
	HRLOI	AC-1,377777	;SETUP FOR COMPARISON>
	IFE	<ZZ&777777-777776>,<
	HRLOI	AC-1,577777	;SETUP FOR COMPARISON>
	ROT	AC,-2		;*ROTATE RIGHT TWO
	CAME	AC,AC-1		;TEST FOR BIT (N+1) A ZERO
	ER3	AC,SN		;AD-AR GATE UNDER TEST FAILED
	JUMPL	AC+2,.-5	;LOOP ON ERROR SWITCH
>
SUBTTL	DIAGNOSTIC SECTION - TEST MQ SHIFT LOGIC GATES

;TEST ROTC LEFT ONE BIT POSITION USING ALL ZEROS
;TEST MQ SHIFT LOGIC GATES
;AC,AC+1 ARE ROTATED LEFT ONE BIT POSITION AND
;AC+1 IS TESTED
;AN ERROR OCCURS IF C(AC+1) IS NON-ZERO AFTER ROTATING

	AC=10
	SAVEAC	(1,1)

E4400:	SETZB	AC,AC+1		;INITIALIZE AC,AC+1 TO ALL ZEROS
	SETZM	AC-1		;INITIALIZE RESULT TO ZERO
	ROTC	AC,1		;*ROTATE LEFT ONE
	CAME	AC+1,AC-1	;TEST AC+1 FOR ALL ZEROS
	ER4	AC+1,4401	;MQ GATING FAILED
	JUMPL	AC+2,E4400	;LOOP ON ERROR SWITCH

;TEST ROTC LEFT ONE BIT POSITION USING ALL ONES
;TEST MQ SHIFT LOGIC GATES
;AC,AC+1 ARE ROTATED LEFT ONE BIT POSITION AND
;AC+1 IS TESTED
;AN ERROR OCCURS IF C(AC+1) IS NON-ZERO AFTER ROTATING

E4500:	SETOB	AC,AC+1		;INITIALIZE AC,AC+1 TO ALL ONES
	SETOM	AC-1		;INITIALIZE RESULT TO ALL ONES
	ROTC	AC,1		;*ROTATE LEFT ONE
	CAME	AC+1,AC-1	;TEST AC+1 FOR ALL ONES
	ER4	AC+1,4501	;MQ GATING FAILED
	JUMPL	AC+2,E4500	;LOOP ON ERROR SWITCH
SN=4600
	ZZ=0

		;TEST AC+1 RIGHT HALF <
E4600:	REPEAT	^D18,<;TEST ROTC LEFT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ONE THROUGH THE 36 BITS OF THE MQ
;TEST MQ SHIFT LOGIC GATES
;AC,AC+1 ARE ROTATED LEFT ONE BIT POSITION AND AC+1
;IS TESTED.
;AN ERROR OCCURS IF THE TESTED BIT IS ZERO AND/OR ANY
;OTHER BIT IS A ONE AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ONE THROUGH ALL 36 BITS OF THE MQ

SN=SN+1
	ZZ=ZZ+ZZ		;SELECTED BIT BEFORE ROTATION
	IFE	ZZ,<ZZ=1>
	YY=ZZ+ZZ		;SELECTED BIT AFTER ROTATION
	SETZ	AC,		;INITILAIZE AC TO ALL ZEROS
	MOVEI	AC+1,ZZ		;SET BIT (N) OF AC+1 RIGHT
	IFN	<ZZ-400000>,<
	MOVEI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ-400000>,<
	MOVSI	AC-1,1		;SETUP FOR COMPARISON>
	ROTC	AC,1		;*ROTATE LEFT ONE
	CAME	AC+1,AC-1	;TEST FOR BIT (N-1) A ONE
	ER4	AC+1,SN		;MQ GATE UNDER TEST FAILED
	JUMPL	AC+2,.-6	;LOOP ON ERROR SWITCH
>

	ZZ=0

		;TEST AC+1 LEFT HALF <
	REPEAT	^D17,<;TEST ROTC LEFT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ONE THROUGH THE 36 BITS OF THE MQ
;TEST MQ SHIFT LOGIC GATES
;AC,AC+1 ARE ROTATED LEFT ONE BIT POSITION AND AC+1
;IS TESTED.
;AN ERROR OCCURS IF THE TESTED BIT IS ZERO AND/OR ANY
;OTHER BIT IS A ONE AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ONE THROUGH ALL 36 BITS OF THE MQ

SN=SN+1
	ZZ=ZZ+ZZ		;SELECTED BIT BEFORE ROTATION
	IFE	ZZ,<ZZ=1>
	YY=ZZ+ZZ		;SELECTED BIT AFTER ROTATION
	SETZ	AC,		;INITIALIZE AC TO ALL ZEROS
	MOVSI	AC+1,ZZ		;SET BIT (N) OF AC+1 LEFT
	MOVSI	AC-1,YY		;SETUP FOR COMPARISON
	ROTC	AC,1		;*ROTATE LEFT ONE
	CAME	AC+1,AC-1	;TEST FOR BIT (N-1) A ONE
	ER4	AC+1,SN		;MQ GATE UNDER TEST FAILED
	JUMPL	AC+2,.-6	;LOOP ON ERROR SWITCH
>
SN=4700
	ZZ=0
		;TEST AC+1 RIGHT HALF <
E4700:	REPEAT	^D18,<;TEST ROTC LEFT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ZERO THROUGH THE 36 BITS OF THE MQ
;TEST MQ SHIFT LOGIC GATES
;AC,AC+1 ARE ROTATED LEFT ONE BIT POSITION AND AC+1
;IS TESTED.
;AN ERROR OCCURS IF THE TESTED BIT IA A ONE AND/OR ANY
;OTHER BIT IA A ZERO AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ZERO THROUGH ALL 36 BITS OF THE MQ

SN=SN+1
	ZZ=ZZ+ZZ+1		;SELECTED BIT BEFORE ROTATION
	IFE	<ZZ-1>,<ZZ=-2>
	YY=<ZZ+ZZ+1>&777777	;SELECTED BIT AFTER ROTATION
	SETOM	AC		;INITIALIZE AC TO ALL ONES
	HRROI	AC+1,ZZ		;CLEAR BIT (N) OF AC+1 RIGHT
	IFN	<ZZ-377777>&777777,<
	HRROI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ-377777>&777777,<
	HRLOI	AC-1,-2		;SETUP FOR COMPARISON>
	ROTC	AC,1		;*ROTATE LEFT ONE
	CAME	AC+1,AC-1	;TEST FOR BIT (N-1) A ZERO
	ER4	AC+1,SN		;MQ GATE UNDER TEST FAILED
	JUMPL	AC+2,.-6	;LOOP ON ERROR SWITCH
>
PAGE
	ZZ=0

		;TEST AC+1 LEFT HALF <
	REPEAT	^D17,<;TEST ROTC LEFT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ZERO THROUGH THE 36 BITS OF THE MQ
;TEST MQ SHIFT LOGIC GATES
;AC, AC+1 ARE ROTATED LEFT ONE BIT POSITION AND AC+1
;IS TESTED.
;AN ERROR OCCURS IF THE TESTED BIT IS A ONE AND/OR ANY
;OTHER BIT IS A ZERO AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ZERO THROUGH ALL 36 BITS
;OF THE MQ

SN=SN+1
	ZZ=ZZ+ZZ+1		;SELECTED BIT BEFORE ROTATION
	IFE	<ZZ-1>,<ZZ=-2>
	YY=<ZZ+ZZ+1>&777777	;SELECTED BIT AFTER ROTATION
	SETOM	AC		;INITAILIZE AC TO ALL ONES
	HRLOI	AC+1,ZZ&777777	;CLEAR BIT (N) OF AC+1 RIGHT
	HRLOI	AC-1,YY		;SETUP FOR COMPARISON
	ROTC	AC,1		;*ROTATE LEFT ONE
	CAME	AC+1,AC-1	;TEST FOR BIT (N-1) A ZERO
	ER4	AC+1,		;MQ GATE UNDER TEST FAILED
	JUMPL	AC+2,.-6	;LOOP ON ERROR SWITCH
>
;TEST ROTC RIGHT ONE BIT POSITION USING ALL ZEROS
;TEST MQ SHIFT LOGIC GATES
;AC,AC+1 ARE ROTATED RIGHT ONE BIT POSITION AND
;AC+1 IS TESTED
;AN ERROR OCCURS IF C(AC+1) IS NON-ZERO AFTER ROTATING

	AC=7
	SAVEAC	(1,1)

E5000:	SETZB	AC,AC+1		;INITIALIZE AC,AC+1 TO ALL ZEROS
	SETZM	AC-1		;INITIALIZE RESULT TO ZERO
	ROTC	AC,-1		;*ROTATE RIGHT ONE
	CAME	AC+1,AC-1	;TEST AC+1 FOR ALL ZEROS
	ER4	AC+1,5001	;MQ GRTING FAILED
	JUMPL	AC+2,E5000	;LOOP ON ERROR SWITCH

;TEST ROTC,RIGHT ONE BIT POSITION USING ALL ONES
;TEST MQ SHIFT LOGIC GATES
;AC,AC+1 ARE ROTATED RIGHT ONE BIT POSITION AND
;AC+1 IS TESTED
;AN ERROR OCCURS IF C(AC+1) IS NONZERO AFTER ROTATING

E5100:	SETOB	AC,AC+1		;INITIALIZE AC,AC+1	TO ALL ONES
	SETOM	AC-1		;INITIALIZE RESULT TO ALL ONES
	ROTC	AC,-1		;*ROTATE RIGHT ONE
	CAME	AC+1,AC-1	;TEST AC+1 FOR ALL ONES
	ER4	AC+1,5101	;MQ GATING FAILED
	JUMPL	AC+2,E5100	;LOOP ON ERROR SWITCH
SN=5200
	ZZ=0
		;TEST AC+1 LEFT HALF<
E5200:	REPEAT	^D18,<;TEST ROTC RIGHT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ONE THROUGH THE 36 BITS OF THE MQ
;TEST MQ SHIFT LOGIC GATES

;AC,AC+1 ARE ROTATED RIGHT ONE BIT POSITION AND AC+1
;IS TESTED.
;AN ERROR OCCURS IF THE TESTED BIT IS ZERO AND/OR ANY
;OTHER BIT IS A ONE AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ONE THROUGH ALL 36 BITS OF THE MQ

SN=SN+1
	ZZ=ZZ/2			;SELECTED BIT BEFORE ROTATION
	IFE	ZZ,<ZZ=400000>
	YY=ZZ/2			;SELECTED BIT AFTER ROTATION
	SETZ	AC,		;INITIALIZE AC TO ALL ZEROS
	MOVSI	AC+1,ZZ		;SET BIT (N) OF AC+1 LEFT
	IFN	<ZZ-1>,	<
	MOVSI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ-1>,<
	MOVEI	AC-1, 400000	;SETUP FOR COMPARISON>
	ROTC	AC,-1		;*ROTATE RIGHT ONE
	CAME	AC+1,AC-1	;TEST FOR BIT (N+1) A ONE
	ER4	AC+1,SN		;MQ GATE UNDER TEST FAILED
	JUMPL	AC+2,.-6	;LOOP ON ERROR SWITCH.
>
PAGE
	ZZ=0

		;TEST AC+1 RIGHT HALF<
	REPEAT	^D17,<;TEST ROTC RIGHT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ONE THROUGH THE 36 BITS OF THE MQ
;TEST MQ SHIFT LOGIC GATES
;AC,AC+1 ARE ROTATED RIGHT ONE BIT POSITION AND AC+1
;IS TESTED.
;AN ERROR OCCURS IF THE TESTED BIT IS ZERO AND/OR ANY
;OTHER BIT IS A ONE AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ONE THROUGH ALL 36 BITS OF THE MQ

SN=SN+1
	ZZ=ZZ/2			;SELECTED BIT BEFORE ROTATION
	IFE	ZZ,<ZZ=400000>

	YY=ZZ/2			;SELECTED BIT AFTER ROTATION
	SETZ	AC,		;INITIALIZE AC TO ALL ZEROS
	MOVEI	AC+1,ZZ		;SET BIT (N) OF AC+1 RIGHT
	MOVEI	AC-1,YY		;SETUP FOR COMPARISON
	ROTC	AC,-1		;*ROTATE RIGHT ONE
	CAME	AC+1,AC-1	;TEST FOR BIT (N+1) A ONE
	ER4	AC+1,SN		;MQ GATE UNDER TEST FAILED
	JUMPL	AC+2,.-6	;LOOP ON ERROR SWITCH
>
SN=5300
	ZZ=1

		;TEST AC+1 LEFT HALF<
E5300:	REPEAT	^D18,<;TEST ROTC RIGHT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ZERO THROUGH THE 36 BITS OF THE MQ
;TEST MQ SHIFT LOGIC GATES
;AC,AC+1 ARE ROTATED RIGHT ONE BIT POSITION AND AC+1
;IS TESTED.
;AN ERROR OCCURS IF THE TESTED BIT IS A ONE AND/OR ANY
;OTHER BIT IS A ZERO AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ZERO THROUGH ALL 36 BITS OF THE MQ

SN=SN+1
	ZZ=<ZZ-1>/2		;SELECTED BIT BEFORE ROTATION
	IFE	<ZZ>,<ZZ=777777377777>
	YY=<<ZZ-1>/2>&777777	;SELECTED BIT AFTER ROTATION
	SETOM	AC		;INITIALIZE AC TO ALL CNES
	HRLOI	AC+1,ZZ&777777	;SETUP BIT (N) OF AC+1 LEFT
	IFN	<ZZ-777776>&777777,<
	HRLOI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ-777776>&777777,<
	HRROI	AC-1,377777	;SETUP FOR COMPARISON>
	ROTC	AC,-1		;*ROTATE RIGHT ONE
	CAME	AC+1,AC-1	;TEST FOR BIT (N+1) A ZERO
	ER4	AC+1,SN		;MQ GATE UNDER TEST FAILED
	JUMPL	AC+2,.-6	;LOOP ON ERROR SWITCH.
>
PAGE
	ZZ=1

		;TEST AC+1 RIGHT HALF<
	REPEAT	^D17,<;TEST ROTC RIGHT ONE BIT POSITION
;TEST ABILITY TO ROTATE A ZERO THROUGH THE 36 BITS OF THE MQ
;TEST MQ SHIFT LOGIC GATES
;AC,AC+1 ARE ROTATED RIGHT ONE BIT POSITION AND AC+1
;IS TESTED.
;AN ERROR OCCURS IF THE TESTED BIT IS A ONE AND/OR ANY
;OTHER BIT IS A ZERO AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ZERO THROUGH ALL 36 BITS OF THE MQ

SN=SN+1
	ZZ=<ZZ-1>/2		;SELECTED BIT BEFORE ROTATION
	IFE<ZZ>,<ZZ=777777377777>
	YY=<<ZZ-1>/2>&777777	;SELECTED BIT AFTER ROTATION
	SETOM	AC		;INITIALIZE AC TO ALL CNES
	HRROI	AC+1,ZZ&777777	;CLEAR BIT (N) OF AC+1 RIGHT
	HRROI	AC-1,YY		;SETUP FOR COMPARISON
	ROTC	AC,-1		;*ROTATE RIGHT ONE
	CAME	AC+1,AC-1	;TEST FOR BIT (N+1) A ZERO
	ER4	AC+1,SN		;MQ GATE UNDER TEST FAILED
	JUMPL	AC+2,.-6	;LOOP ON ERROR SWITCH
>
;TEST ROTC RIGHT TWO BIT POSITIONS USING ALL ZEROS
;TEST MQ SHIFT LOGIC GATES
;AC,AC+1 ARE ROTATED RIGHT TWO BIT POSITIONS AND
;AC+1 IS TESTED
;AN ERROR OCCURS IF C(AC+1) IS NON-ZERO AFTER ROTATING

	AC=6
	SAVEAC	(1,1)
E5400:
	SETZB	AC,AC+1		;INITIALIZE AC,AC+1 TO ALL ZEROS
	SETZM	AC-1		;INITIALIZE RESULT TO ZERO
	ROTC	AC,-2		;*ROTATE RIGHT TWO
	CAME	AC+1,AC-1	;TEST AC+1 FOR ALL ZEROS
	ER4	AC+1,5401	;MQ GATING FAILED
	JUMPL	AC+2,E5400	;LOOP ON ERROR SWITCH

;TEST ROTC RIGHT TWO BIT POSITIONS USING ALL ONES
;TEST MQ SHIFT LOGIC GATES
;AC,AC+1 ARE ROTATED RIGHT TWO BIT POSITIONS AND
;AC+1 IS TESTED
;AN ERROR OCCURS IF C(AC+1) IS ZERO AFTER ROTATING

E5500:	SETOB	AC,AC+1		;INITIALIZE AC,AC+1 TO ALL ONES
	SETOM	AC-1		;INITIALIZE RESULT TO ALL ONES
	ROTC	AC,-2		;*ROTATE RIGHT TWO
	CAME	AC+1,AC-1	;TEST AC+1 FOR ALL ONES
	ER4	AC+1,5501	;MQ GATING FAILED
	JUMPL	AC+2,E5500	;LOOP ON ERROR SWITCH
SN=5600
	ZZ=0

		;TEST AC+1 LEFT HALF<
E5600:	REPEAT	^D18,<;TEST ROTC RIGHT TWO BIT POSITIONS
;TEST ABILITY TO ROTATE A ONE THROUGH THE 36 BITS OF THE MQ
;TEST MQ SHIFT LOGIC GATES
;AC,AC+1 ARE ROTATED RIGHT TWO BIT POSITIONS AND AC+1
;IS TESTED.
;AN ERROR OCCURS IF THE TESTED BIT IS ZERO AND/OR ANY
;OTHER BIT IS A ONE AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ONE THROUGH ALL 36 BITS OF THE MQ

SN=SN+1
	ZZ=ZZ/2			;SELECTED BIT BEFORE ROTATION
	IFE	ZZ,<ZZ=400000>
	YY=ZZ/4			;SELECTED BIT AFTER ROTATION
	SETZ	AC,		;INITIALIZE AC TO ALL ZEROS
	MOVSI	AC+1,ZZ		;SET BIT (N) OF AC+1 LEFT
	IFG	<ZZ-2,>,<
	MOVSI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ-2>,<
	MOVEI	AC-1,400000	;SETUP FOR COMPARISON>
	IFE	<ZZ-1>,<
	MOVEI	AC-1,200000	;SETUP FOR COMPARISON>
	ROTC	AC,-2		;*ROTATE RIGHT TWO
	CAME	AC+1,AC-1	;TEST FOR BIT (N+2) A ONE
	ER4	AC+1,SN		;MQ GATE UNDER TEST FAILED
	JUMPL	AC+2,.-6	;LOOP ON ERROR SWITCH
>
PAGE
	ZZ=0

		;TEST AC+1 RIGHT HALF<
	REPEAT	^D16,<;TEST ROTC RIGHT TWO BIT POSITIONS
;TEST ABILITY TO ROTATE A ONE THROUGH THE 36 BITS OF THE MQ
;TEST MQ SHIFT LOGIC GATES
;AC, AC+1 ARE ROTATED RIGHT TWO BIT POSITIONS AND AC+1
;IS TESTED.
;AN ERROR OCCURS IF THE TESTED BIT IS ZERO AND/OR ANY
;OTHER BIT IS A ONE AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ONE THROUGH ALL 36 BITS OF THE MQ

SN=SN+1
	ZZ=ZZ/2			;SELECTED BIT BEFORE ROTATION
	IFE	ZZ,<ZZ=400000>
	YY=ZZ/4			;SELECTED BIT AFTER ROTATION
	SETZ	AC,		;INITIALIZE AC TO ALL ZEROS
	MOVEI	AC+1,ZZ		;SET BIT (N) OF AC+1 RIGHT

	MOVEI	AC-1,YY		;SETUP FOR COMPARISON
	ROTC	AC,-2		;*ROTATE RIGHT TWO
	CAME	AC+1,AC-1	;TEST FOR BIT (N+2) A ONE
	ER4	AC+1,SN		;MQ GATE UNDER TEST FAILED
	JUMPL	AC+2,.-6	;LOOP ON ERROR SWITCH
>
SN=5700
	ZZ=1

 		;TEST AC+1 LEFT HALF <
E5700:	REPEAT ^D18,<;TEST ROTC RIGHT TWO BIT POSITIONS
;TEST ABILITY TO ROTATE A ZERO THROUGH THE 36 BITS OF THE MQ
;TEST MQ SHIFT LOGIC GATES
;AC, AC+1 ARE ROTATED RIGHT TWO BIT POSITIONS AND AC+1
;IS TESTED.
;AN ERROR OCCURS IF THE TESTED BIT IS A ONE AND/OR ANY
;OTHER BIT IS A ZERO AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ZERO THROUGH ALL 36 BITS OF THE MQ

SN=SN+1

	ZZ=<ZZ-1>/2		;SELECTED BIT BEFORE ROTATION
	IFE<ZZ>,<ZZ=777777377777>
	YY=<<ZZ-3>/4>&777777	;SELECTED BIT AFTER ROTATION
	SETOM	AC		;INITIALIZE AC TO ALL ONES
	HRLOI	AC+1,ZZ&777777	;CLEAR BIT (N) OF AC+1 LEFT
	IFG	<ZZ-777775>&777777,<
	HRLOI	AC-1,YY		;SETUP FOR COMPARISON>
	IFE	<ZZ-777775>&777777,<
	HRROI	AC-1,377777	;SETUP FOR COMPARISON>
	IFE	<ZZ-777776>&777777,<
	HRROI	AC-1,577777	;SETUP FOR COMPARISON>
	ROTC	AC,-2		;*ROTATE RIGHT TWO
	CAME	AC+1,AC-1	;TEST FOR BIT (N+2) A ZERO
	ER4	AC+1,SN		;MQ GATE UNDER TEST FAILED
	JUMPL	AC+2,.-6	;LOOP ON ERROR SWITCH
>
PAGE
	ZZ=1

		;TEST AC+1 RIGHT HALF<
	REPEAT ^D16,<;TEST ROTC RIGHT TWO BIT POSITIONS
;TEST ABILITY TO ROTATE A ZERO THROUGH THE 36 BITS OF THE MQ
;TEST MQ SHIFT LOGIC GATES
;AC, AC+1 ARE ROTATED RIGHT TWO BIT POSITIONS AND AC+1
;IS TESTED.
;AN ERROR OCCURS IF THE TESTED BIT IS A ONE AND/OR ANY
;OTHER BIT IS A ZERO AFTER ROTATING
;THIS TEST IS REPEATED 36 TIMES TO RIPPLE A ZERO THROUGH ALL 36 BITS OF THE MQ

SN=SN+1
	ZZ=<ZZ-1>/2		;SELECTED BIT BEFORE ROTATION
	IFE	<ZZ>,<ZZ=777777377777>
	YY=<<ZZ-3>/4>&777777	;SELECTED BIT AFTER ROTATION
	SETOM	AC		;INITIALIZE AC TO ALL ONES
	HRROI	AC+1,ZZ&777777	;CLEAR BIT (N) OF AC+1 RIGHT
	HRROI	AC-1,YY		;SETUP FOR COMPARISON
	ROTC	AC,-2		;*ROTATE RIGHT TWO
	CAME	AC+1,AC-1	;TEST FOR BIT (N+2) A ZERO
	ER4	AC+1,SN		;MQ GATE UNDER TEST FAILED
	JUMPL	AC+2,.-6	;LOOP ON ERROR SWITCH
>
SUBTTL	DIAGNOSTIC SECTION - END CONNECTIONS TEST (ROT)

;END CONNECTIONS-ROT
;TEST AR END BIT INPUT GATES
;TEST LEFT-AR0,1,34,35 SHLT INP GATES
;TEST RIGHT-AR0,1,34,35 SHRT INP GATES
;AC IS ROTATED LEFT/RIGHT
;AND END BITS TESTED

;SHIFT CONNECTIONS TEST
;TEST AR35 SHLT INP-ONE'S - ROT AC,1
;TEST ABILITY TO ROTATE INTO BIT 35 OF AR
	SR1	(60,400000,0,0,1,ROT,1)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHLT INP-ZERO'S - ROT AC,1
;TEST ABILITY TO ROTATE INTO BIT 35 OF AR
	SR1	(61,377777,-1,-1,-2,ROT,1)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHLT INP-ONE'S - ROT AC,1
;TEST ABILITY TO ROTATE INTO BIT 34 OF AR
	SR1	(62,0,1,0,2,ROT,1)
PAGE
;SHIFT CONNECTIONS TEST
;TEST AR34 SHLT INP-ZERO'S - ROT AC,1
;TEST ABILITY TO ROTATE INTO BIT 34 OF AR
	SR1	(63,-1,-2,-1,-3,ROT,1)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHLT INP-ONE'S - ROT AC,1
;TEST ABILITY TO ROTATE INTO BIT 1 OF AR
	SR1	(64,100000,0,200000,0,ROT,1)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHLT INP-ZERO'S - ROT AC,1
;TEST ABILITY TO ROTATE INTO BIT 1 OF AR
	SR1	(65,677777,-1,577777,-1,ROT,1)
PAGE
;SHIFT CONNECTIONS TEST
;TEST AR0 SHLT INP-ONE'S - ROT AC,1
;TEST ABILITY TO ROTATE INTO BIT 0 OF AR
	SR1	(66,200000,0,400000,0,ROT,1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHLT INP-ZERO'S - ROT AC,1
;TEST ABILITY TO ROTATE INTO BIT 0 OF AR
	SR1	(67,577777,-1,377777,-1,ROT,1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ONE'S - ROT AC,-1
;TEST ABILITY TO ROTATE INTO BIT 0 OF AR
	SR1	(70,0,1,400000,0,ROT,-1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ZERO'S - ROT AC,-1
;TEST ABILITY TO ROTATE INTO BIT 0 OF AR
	SR1	(71,-1,-2,377777,-1,ROT,-1)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ONE'S - ROT AC,-1
;TEST ABILITY TO ROTATE INTO BIT 1 OF AR
	SR1	(72,400000,0,200000,0,ROT,-1)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ZERO'S - ROT AC,-1
;TEST ABILITY TO ROTATE INTO BIT 1 OF AR
	SR1	(73,377777,-1,577777,-1,ROT,-1)
PAGE
;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ONE'S - ROT AC,-1
;TEST ABILITY TO ROTATE INTO BIT 34 OF AR
	SR1	(74,0,4,0,2,ROT,-1)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ZERO'S - ROT AC,-1
;TEST ABILITY TO ROTATE INTO BIT 34 OF AR
	SR1	(75,-1,-5,-1,-3,ROT,-1)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ONE'S - ROT AC,-1
;TEST ABILITY TO ROTATE INTO BIT 35 OF AR
	SR1	(76,0,2,0,1,ROT,-1)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ZERO'S - ROT AC,-1
;TEST ABILITY TO ROTATE INTO BIT 35 OF AR
	SR1	(77,-1,-3,-1,-2,ROT,-1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ONE'S - ROT AC,-2
;TEST ABILITY TO ROTATE INTO BIT 0 OF AR
	SR1	(100,0,2,400000,0,ROT,-2)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ZERO'S - ROT AC,-2
;TEST ABILITY TO ROTATE INTO BIT 0 OF AR
	SR1	(101,-1,-3,377777,-1,ROT,-2)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ONE'S - ROT AC,-2
;TEST ABILITY TO ROTATE INTO BIT 1 OF AR
	SR1	(102,0,1,200000,0,ROT,-2)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ZERO'S - ROT AC,-2
;TEST ABILITY TO ROTATE INTO BIT 1 OF AR
	SR1	(103,-1,-2,577777,-1,ROT,-2)
PAGE
;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ONE'S - ROT AC,-2
;TEST ABILITY TO ROTATE INTO BIT 34 OF AR
	SR1	(104,0,10,0,2,ROT,-2)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ZERO'S - ROT AC,-2
;TEST ABILITY TO ROTATE INTO BIT 34 OF AR
	SR1	(105,-1,-11,-1,-3,ROT,-2)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ONE'S - ROT AC,-2
;TEST ABILITY TO ROTATE INTO BIT 35 OF AR
	SR1	(106,0,4,0,1,ROT,-2)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ZERO'S - ROT AC,-2
;TEST ABILITY TO ROTATE INTO BIT 35 OF AR
	SR1	(107,-1,-5,-1,-2,ROT,-2)

SUBTTL	DIAGNOSTIC SECTION - END CONNECTIONS TEST (LSH)

;END CONNECTIONS-LSH
;TEST AR END BIT INPUT GATES
;TEST LEFT-AR0,1,34,35 SHLT INP GATES
;TEST RIGHT-AR0,1,34,35 SHRT INP GATES
;AC IS SHIFTED LEFT/RIGHT
;AND END BITS TESTED

;SHIFT CONNECTIONS TEST
;TEST AR35 SHLT INP-ZERO'S - LSH AC,1
;TEST ABILITY TO SHIFT INTO BIT 35 OF AR
	SR1	(110,-1,-1,-1,-2,LSH,1)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHLT INP-ONE'S - LSH AC,1
;TEST ABILITY TO SHIFT INTO BIT 34 OF AR
	SR1	(111,0,1,0,2,LSH,1)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHLT INP-ZERO'S - LSH AC,1
;TEST ABILITY TO SHIFT INTO BIT 34 OF AR
	SR1	(112,-1,-2,-1,-4,LSH,1)
PAGE
;SHIFT CONNECTIONS TEST
;TEST AR1 SHLT INP-ONE'S - LSH AC,1
;TEST ABILITY TO SHIFT INTO BIT 1 OF AR
	SR1	(113,100000,0,200000,0,LSH,1)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHLT INP-ZERO'S - LSH AC,1
;TEST ABILITY TO SHIFT INTO BIT 1 OF AR
	SR1	(114,677777,-1,577777,-2,LSH,1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHLT INP-ONE'S - LSH AC,1
;TEST ABILITY TO SHIFT INTO BIT 0 OF AR
	SR1	(115,200000,0,400000,0,LSH,1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHLT INP-ZERO'S - LSH AC,1
;TEST ABILITY TO SHIFT INTO BIT 0 OF AR
	SR1	(116,577777,-1,377777,-2,LSH,1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ZERO'S - LSH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 0 OF AR
	SR1	(117,-1,-1,377777,-1,LSH,-1)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ONE'S - LSH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 1 OF AR
	SR1	(120,400000,0,200000,0,LSH,-1)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ZERO'S - LSH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 1 OF AR
	SR1	(121,377777,-1,177777,-1,LSH,-1)
PAGE
;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ONE'S - LSH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 34 OF AR
	SR1	(122,0,4,0,2,LSH,-1)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ZERO'S - LSH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 34 OF AR
	SR1	(123,-1,-5,377777,-3,LSH,-1)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ONE'S - LSH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 35 OF AR
	SR1	(124,0,2,0,1,LSH,-1)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ZERO'S - LSH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 35 OF AR
	SR1	(125,-1,-3,377777,-2,LSH,-1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ZERO'S - LSH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 0 OF AR
	SR1	(126,-1,-1,177777,-1,LSH,-2)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ZERO'S - LSH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 1 OF AR
	SR1	(127,-1,-1,177777,-1,LSH,-2)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ONE'S - LSH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 34 OF AR
	SR1	(130,0,10,0,2,LSH,-2)
PAGE
;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ZERO'S - LSH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 34 OF AR
	SR1	(131,-1,-11,177777,-3,LSH,-2)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ONE'S - LSH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 35 OF AR
	SR1	(132,0,4,0,1,LSH,-2)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ZERO'S - LSH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 35 OF AR
	SR1	(133,-1,-5,177777,-2,LSH,-2)
SUBTTL	DIAGNOSTIC SECTION - END CONNECTIONS TEST (ASH)

;END CONNECTIONS-ASH
;TEST AR END BIT INPUT GATES
;TEST LEFT-AR0,1,34,35 SHLT INP GATES
;TEST RIGHT-AR0,1,34,35 SHRT INP GATES
;AC IS SHIFTD LEFT/RIGHT
;AND END BITS TESTED

;SHIFT CONNECTIONS TEST
;TEST AR35 SHLT INP-ZERO'S - ASH AC,1
;TEST ABILITY TO SHIFT INTO BIT 35 OF AR
	SR1	(134,-1,-1,-1,-2,ASH,1)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHLT INP-ONE'S - ASH AC,1
;TEST ABILITY TO SHIFT INTO BIT 34 OF AR
	SR1	(135,0,1,0,2,ASH,1)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHLT INP-ZERO'S - ASH AC,1
;TEST ABILITY TO SHIFT INTO BIT 34 OF AR
	SR1	(136,-1,-2,-1,-4,ASH,1)
PAGE
;SHIFT CONNECTIONS TEST
;TEST AR1 SHLT INP-ONE'S - ASH AC,1
;TEST ABILITY TO SHIFT INTO BIT 1 OF AR
	SR1	(137,100000,0,200000,0,ASH,1)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHLT INP-ZERO'S - ASH AC,1
;TEST ABILITY TO SHIFT INTO BIT 1 OF AR
	SR1	(140,677777,-1,577777,-2,ASH,1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHLT INP-ONE'S - ASH AC,1
;TEST ABILITY TO SHIFT INTO BIT 0 OF AR
	SR1	(141,400000,0,400000,0,ASH,1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHLT INP-ZERO'S - ASH AC,1
;TEST ABILITY TO SHIFT INTO BIT 0 OF AR
	SR1	(142,377777,-1,377777,-2,ASH,1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ONE'S - ASH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 0 OF AR
	SR1	(143,400000,0,600000,0,ASH,-1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ZERO'S - ASH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 0 OF AR
	SR1	(144,377777,-1,177777,-1,ASH,-1)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ONE'S - ASH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 1 OF AR
	SR1	(145,400000,0,600000,0,ASH,-1)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ZERO'S - ASH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 1 OF AR
	SR1	(146,377777,-1,177777,-1,ASH,-1)
PAGE
;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ONE'S - ASH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 34 OF AR
	SR1	(147,0,4,0,2,ASH,-1)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ZERO'S - ASH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 34 OF AR
	SR1	(150,-1,-5,-1,-3,ASH,-1)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ONE'S - ASH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 35 OF AR
	SR1	(151,0,2,0,1,ASH,-1)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ZERO'S - ASH AC,-1
;TEST ABILITY TO SHIFT INTO BIT 35 OF AR
	SR1	(152,-1,-3,-1,-2,ASH,-1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ONE'S - ASH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 0 OF AR
	SR1	(153,400000,0,700000,0,ASH,-2)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ZERO'S - ASH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 0 OF AR
	SR1	(154,377777,-1,077777,-1,ASH,-2)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ONE'S - ASH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 1 OF AR
	SR1	(155,400000,0,700000,0,ASH,-2)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ZERO'S - ASH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 1 OF AR
	SR1	(156,377777,-1,077777,-1,ASH,-2)
PAGE
;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ONE'S - ASH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 34 OF AR
	SR1	(157,0,10,0,2,ASH,-2)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ZERO'S - ASH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 34 OF AR
	SR1	(160,-1,-11,-1,-3,ASH,-2)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ONE'S - ASH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 35 OF AR
	SR1	(161,0,4,0,1,ASH,-2)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ZERO'S - ASH AC,-2
;TEST ABILITY TO SHIFT INTO BIT 35 OF AR
	SR1	(162,-1,-5,-1,-2,ASH,-2)

SUBTTL	DIAGNOSTIC SECTION - END CONNECTIONS TEST (ROTC)

;END CONNECTIONS-ROTC
;TEST AR-MQ END BIT INPUT GATES
;TEST LEFT-AR0,1,34,35 SHLT INP GATES
;          MQ0,1,34,35 SHLT INP GATES
;TEST RIGHT-AR0,1,34,35 SHRT INP GATES
;	   MQ0,1,34,35 SHRT INPUT GATES
;AC,AC+1 ARE ROTATED LEFT/RIGHT AND
;END BITS ARE TESTED
;TEST ASSUMES BOTH REGISTERS ARE
;CAPABLE OF ROTATING 1,-1 AND -2 BIT POSITIONS CORRECTLY

;SHIFT CONNECTIONS TEST
;TEST MQ35 SHLT INP-ONE'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 35 OF MQ
	SR2	(163,400000,0,0,0,0,0,0,1,ROTC,1)

;SHIFT CONNECTIONS TEST
;TEST MQ35 SHLT INP-ZERO'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 35 OF MQ
	SR2	(164,377777,-1,-1,-1,-1,-1,-1,-2,ROTC,1)

;SHIFT CONNECTIONS TEST
;TEST MQ34 SHLT INP-ONE'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 34 OF MQ
	SR2	(165,0,0,0,1,0,0,0,2,ROTC,1)
PAGE
;SHIFT CONNECTIONS TEST
;TEST MQ34 SHLT INP-ZERO'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 34 OF MQ
	SR2	(166,-1,-1,-1,-2,-1,-1,-1,-3,ROTC,1)

;SHIFT CONNECTIONS TEST
;TEST MQ1 SHLT INP-ONE'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 1 OF MQ
	SR2	(167,0,0,100000,0,0,0,200000,0,ROTC,1)

;SHIFT CONNECTIONS TEST
;TEST MQ1 SHLT INP-ZERO'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 1 OF MQ
	SR2	(170,-1,-1,677777,-1,-1,-1,577777,-1,ROTC,1)
PAGE
;SHIFT CONNECTIONS TEST
;TEST MQ0 SHLT INP-ONE'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 0 OF MQ
	SR2	(171,0,0,200000,0,0,0,400000,0,ROTC,1)

;SHIFT CONNECTIONS TEST
;TEST MQ0 SHLT INP-ZERO'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 0 OF MQ
	SR2	(172,-1,-1,577777,-1,-1,-1,377777,-1,ROTC,1)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHLT INP-ONE'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 35 OF AR
	SR2	(173,0,0,400000,0,0,1,0,0,ROTC,1)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHLT INP-ZERO'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 35 OF AR
	SR2	(174,-1,-1,377777,-1,-1,-2,-1,-1,ROTC,1)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHLT INP-ONE'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 34 OF AR
	SR2	(175,0,1,0,0,0,2,0,0,ROTC,1)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHLT INP-ZERO'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 34 OF AR
	SR2	(176,-1,-2,-1,-1,-1,-3,-1,-1,ROTC,1)
PAGE
;SHIFT CONNECTIONS TEST
;TEST AR1 SHLT INP-ONE'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 1 OF AR
	SR2	(177,100000,0,0,0,200000,0,0,0,ROTC,1)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHLT INP-ZERO'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 1 OF AR
	SR2	(200,677777,-1,-1,-1,577777,-1,-1,-1,ROTC,1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHLT INP-ONE'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 0 OF AR
	SR2	(201,200000,0,0,0,400000,0,0,0,ROTC,1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHLT INP-ZERO'S - ROTC AC,1
;TEST ABILITY TO ROTATE INTO BIT 0 OF AR
	SR2	(202,577777,-1,-1,-1,377777,-1,-1,-1,ROTC,1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ONE'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 0 OF AR
	SR2	(203,0,0,0,1,400000,0,0,0,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ZERO'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 0 OF AR
	SR2	(204,-1,-1,-1,-2,377777,-1,-1,-1,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ONE'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 1 OF AR
	SR2	(205,400000,0,0,0,200000,0,0,0,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ZERO'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 1 OF AR
	SR2	(206,377777,-1,-1,-1,577777,-1,-1,-1,ROTC,-1)
PAGE
;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ONE'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 34 OF AR
	SR2	(207,0,4,0,0,0,2,0,0,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ZERO'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 34 OF AR
	SR2	(210,-1,-5,-1,-1,-1,-3,-1,-1,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ONE'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 35 OF AR
	SR2	(211,0,2,0,0,0,1,0,0,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ZERO'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 35 OF AR
	SR2	(212,-1,-3,-1,-1,-1,-2,-1,-1,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST MQ0 SHRT INP-ONE'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 0 OF MQ
	SR2	(213,0,1,0,0,0,0,400000,0,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST MQ0 SHRT INP-ZERO'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 0 OF MQ
	SR2	(214,-1,-2,-1,-1,-1,-1,377777,-1,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST MQ1 SHRT INP-ONE'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 1 OF MQ
	SR2	(215,0,0,400000,0,0,0,200000,0,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST MQ1 SHRT INP-ZERO'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 1 OF MQ
	SR2	(216,-1,-1,377777,-1,-1,-1,577777,-1,ROTC,-1)
PAGE
;SHIFT CONNECTIONS TEST
;TEST MQ34 SHRT INP-ONE'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 34 OF MQ
	SR2	(217,0,0,0,4,0,0,0,2,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST MQ34 SHRT INP-ZERO'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 34 OF MQ
	SR2	(220,-1,-1,-1,-5,-1,-1,-1,-3,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST MQ35 SHRT INP-ONE'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 35 OF MQ
	SR2	(221,0,0,0,2,0,0,0,1,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST MQ35 SHRT INP-ZERO'S - ROTC AC,-1
;TEST ABILITY TO ROTATE INTO BIT 35 OF MQ
	SR2	(222,-1,-1,-1,-3,-1,-1,-1,-2,ROTC,-1)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ONE'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 0 OF AR
	SR2	(223,0,0,0,2,400000,0,0,0,ROTC,-2)

;SHIFT CONNECTIONS TEST
;TEST AR0 SHRT INP-ZERO'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 0 OF AR
	SR2	(224,-1,-1,-1,-3,377777,-1,-1,-1,ROTC,-2)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ONE'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 1 OF AR
	SR2	(225,0,0,0,1,200000,0,0,0,ROTC,-2)

;SHIFT CONNECTIONS TEST
;TEST AR1 SHRT INP-ZERO'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 1 OF AR
	SR2	(226,-1,-1,-1,-2,577777,-1,-1,-1,ROTC,-2)
PAGE
;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ONE'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 34 OF AR
	SR2	(227,0,10,0,0,0,2,0,0,ROTC,-2)

;SHIFT CONNECTIONS TEST
;TEST AR34 SHRT INP-ZERO'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 34 OF AR
	SR2	(230,-1,-11,-1,-1,-1,-3,-1,-1,ROTC,-2)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ONE'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 35 OF AR
	SR2	(231,0,4,0,0,0,1,0,0,ROTC,-2)

;SHIFT CONNECTIONS TEST
;TEST AR35 SHRT INP-ZERO'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 35 OF AR
	SR2	(232,-1,-5,-1,-1,-1,-2,-1,-1,ROTC,-2)

;SHIFT CONNECTIONS TEST
;TEST MQ0 SHRT INP-ONE'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 0 OF MQ
	SR2	(233,0,2,0,0,0,0,400000,0,ROTC,-2)

;SHIFT CONNECTIONS TEST
;TEST MQ0 SHRT INP-ZERO'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 0 OF MQ
	SR2	(234,-1,-3,-1,-1,-1,-1,377777,-1,ROTC,-2)

;SHIFT CONNECTIONS TEST
;TEST MQ1 SHRT INP-ONE'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 1 OF MQ
	SR2	(235,0,1,0,0,0,0,200000,0,ROTC,-2)

;SHIFT CONNECTIONS TEST
;TEST MQ1 SHRT INP-ZERO'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 1 OF MQ
	SR2	(236,-1,-2,-1,-1,-1,-1,577777,-1,ROTC,-2)
PAGE
;SHIFT CONNECTIONS TEST
;TEST MQ34 SHRT INP-ONE'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 34 OF MQ
	SR2	(237,0,0,0,10,0,0,0,2,ROTC,-2)

;SHIFT CONNECTIONS TEST
;TEST MQ34 SHRT INP-ZERO'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 34 OF MQ
	SR2	(240,-1,-1,-1,-11,-1,-1,-1,-3,ROTC,-2)

;SHIFT CONNECTIONS TEST
;TEST MQ35 SHRT INP-ONE'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 35 OF MQ
	SR2	(241,0,0,0,4,0,0,0,1,ROTC,-2)

;SHIFT CONNECTIONS TEST
;TEST MQ35 SHRT INP-ZERO'S - ROTC AC,-2
;TEST ABILITY TO ROTATE INTO BIT 35 OF MQ
	SR2	(242,-1,-1,-1,-5,-1,-1,-1,-2,ROTC,-2)

LAST1:	;JRST	BEGEND

	END	START